Hotline: 0908 287 626
Showroom TP.HCM
Hỗ trợ kỹ thuật


Mã sản phẩm: 1198

Mô tả sản phẩm



Providing classic looks and meticulous build quality, this arm offers all the most important features, traditional ‘J’ shaped tone-arm, detachable S2-R aluminium headshell with azimuth adjustment, two stage tungsten counterbalance system, superb quality ball race bearings and a level of rigidity to suit all types of cartridge.

Series M2-12R Dimensions  
A – Distance from pivot to stylus 308.81mm
B – Distance from pivot to turntable centre 295.60mm
C – Cartridge fixing centres 12.70mm
D – Offset angle 17.62°
E – Linear offset 93.47mm
F – Overhang 13.21mm
G – Height above mounting surface max. 87.0mm
min. 63.0mm
H – Mounting surface to underside of headshell max. 69.75mm
min. 45.75mm
J – Depth below mounting surface 46.0mm
K – Balance weight radial clearance 85.0mm



  • The 12in construction with thin walled stainless steel tone-arm takes advantage of the reduction in maximum tracking error/distortion afforded by the greater arm length when compared with 9in models.
  • S2-R Aluminum shell detachable and interchangeable without disturbing cartridge or wiring.
  • Double draw-in pin bayonet fitting design ensures a rigid junction with the tone-arm.
  • Unique headshell to tone-arm coupling readily allows cartridge azimuth adjustment.
  • Stainless steel cross shaft, ground and thread ground. Carried in a substantial yoke on 10mm precision ball races.
  • Stainless steel vertical shaft, ground and thread ground, with integral 16mm diameter flange to couple shaft and yoke.
  • 23mm diameter steel pillar, heat treated, ground and honed, carries two 17mm precision ball races, widely spaced to resist tilt.
  • Internal wiring in silver litz.


  • Internal constrained layer damps minute residual vibrations making tone-arm acoustically inert.


  • Anti-skate control operates through Anti-Skate weight and filament, adjustable up to 5g VTF.
  • Lowering/raising control gives smooth positive action. Height of lift can be adjusted.
  • Thumbwheel (Vertical tracking angle VTA) height adjustment.
  • Bedplate affords +/- 12.0mm movement to facilitate (Horizontal tracking angle HTA) adjustment.
  • Base slides on bedplate for horizontal tracking adjustment with double null-point protractor.
  • Tungsten-alloy balance weight inserts allow maximum centre of gravity shift to balance a greater range of cartridges up to 38g in S2-R headshell and direct plug-in heads up to 46g.
  • Precise vertical tracking force up to 5g applied in 0,5g increments via rider weight and graduated wayrod.


Series M2-12R Specifications  
Effective mass 18.0g
Cartridge balance range Up to 38.0g (S2-R headshell)
Up to 46.0g (Plug-in heads)
Vertical tracking force VTF up to 5.0g
Maximum tracking error 0.01°/mm
Null points Inner 66.04mm
Outer 120.90mm
Weight net 834.0g
Audio lead 1.2m balanced hybrid cable with
gold plated connectors



Manual for Series M2-9R & M2-12R Tonearms (PDF)

Ý kiến bạn đọc